In this final Fusion 360 design series tutorial, I show you two ways to export your 3D model into 2D templates that can be used for laser cutting, CNC machines, or printed on paper.

In this tutorial, I show you how to use the Fusion 360 Sketch tool to model the complex shape of an airliner’s nose section.

In this tutorial, we will complete the primary structure of our airplane by modeling the empennage, or tail section of an airliner. This is the most advance episode in this series, but when complete, you will have completed the primary airframe.

In this video tutorial I’ll show you how to continue designing wings for your RC airplane starting where we left off in Part 1. Whether you’re building with balsa, foam, or 3D print this episode, when complete, will leave you with a nice wing.

In this video tutorial I’ll show you how to continue designing wings for your RC airplane starting where we left off in Part 1. Whether you’re building with balsa, foam, or 3D print this episode, when complete, will leave you with a nice wing.

Designing a plane but don't know where to begin with wing design? In this video tutorial I’ll show you how to start designing wings for your RC airplane. Whether you’re building with balsa, 3D printing, or developing foam plans the Fusion 360 concepts are the same.

As a follow up to "How to Design a RC Airplane", this episode is to expand on canvas calibrations in Fusion 360 . You should have watched that episode or have a basic understanding of Fusion 360.

(Video)
Want to design a RC airplane but don't know where to start?
In this video episode, I show you how to used Fusion 360 to start designing your first RC model Airplane that you can then use for laser or CNC machines. Start take your scratch building project to the next level!

Watch my first ever video (An Introduction to my YouTube Channel). a short minute long video introducing myself and what you will be seeing from me over time.